HOW TO CHANGE A FLAT TIRE

 

Most drivers don't know how to change a flat tire and you can't drive if you have a flat tire, but change a flat tire is really very easy.

I am going to show you the most basic steps to change a flat tire.

• Firstable you have to stop your car in a safe spot and apply the parking break.
• Then you have to look for your spare tire and take it out, by the way many cars don't have a spare tire and there is a big problem.Now put the spare tire on the ground.
• If you want you can consult your car's manual, this is a really good help.
• If your wheel has a hubcap, you should remove it. You have to use the wrench slightly loosen each nut. 
• At this time you are ready to raise your car off the ground. You have to use a jack for that.
• Read carefully your car owner's manual, it will tell you where you need to place it.
• Now,  when you have the car raise use the wrench to completly unscrew the nuts on the Wheel.
• After that you will be able to pull the wheel off,then put the nuts back.
• You can lower the car back on the ground, now you need to take the wrench and turn the nuts clockwise as hard as you can.
• Of course do not forget to put the flat tire into the trunk so you can take it to be repaired.

Easy right!? Finally you learned how to change a flat tire and you are ready to go.